When you need it
You need to build a working room from scratch: sections, objects and connectors, not a set of scattered sticky notes.
Before you start
- A room assigned to you or to a colleague.
- Edit permission.
Steps
- Open More (⋯) → Templates… and choose Kanban room, Roadmap, Story map or Roadmap example. The template adds its own objects and leaves your existing work in place.
- If you do not need a template, start with a frame: click Frame on the rail and name it after the section it holds. Result: a container; a sticky whose centre lands inside becomes part of the frame.
- Add sticky notes with the Sticky note button on the tool rail and drag them into frames. Result: the sticky notes join the sections and move with them; a sticky note dragged out lives separately again.
- Select a sticky note and drag from its edge to another sticky note. Result: a connector with an anchor at both ends.
- Set the connector route on the connector bar: straight, elbow or curved. Result: the diagram stays readable, and lines do not cross unless they must.
- Select a frame or a shape and drag a corner. Result: the size changed, the frame's contents stayed as they were, and the shape's text fitted the new rectangle.
- Rename the room in the header. Result: every participant sees the name.
Check
- Move a frame: the objects inside move with it.
- Resize a frame: the contents are not scaled, and an object whose centre leaves the boundary becomes free.
- Move a sticky note: connectors follow it and do not break.
- The save indicator shows saved.
Common mistakes
| Symptom | Cause |
|---|---|
| A sticky note does not connect | the object is not selected: anchors are visible only on the selected object |
| No second connector between a pair | one pair holds one connector; change the existing one |
| A card does not connect | the card must be visible in its cell; the line follows the cell |
Where to go next
Card fields — status, assignee and due date.
Connectors: anchors and routing — why a line behaves exactly this way.